GREENGUARD Certified
Taylor 2071 Floor Adhesive. This is a waterbase product (cleans up with water) that is easy to use to glue down any type of hardwood or engineered flooring products. Comes in one gallon or four gallon pails and covers approximaly 60 sq/ft per gallon when used on a 3/4" solid hardwood product. Recommended trowel is 3/16" x 1/4" x 1/2" Flat V-Notch.

Get more info including application suggestions and MSDS sheets from the manufacturer's website at www.wftaylor.com

4 Gallon Pail - $119.00
1 Gallon - $37.50

CHEMREX® CX-948 is a onecomponent, high-strength, high-solids, low-VOC polyurethanebased adhesive that is 3 times stronger than conventional adhesives. Its patented technologically advanced formula produces a permanent overnight bond to almost any substrate. Use it in all climates. Perfect for glueing down boards along the wall, installing stair components, or any number of other construction needs.

Features
• VOC compliant Environmentally friendly
• Low odor Replaces solvent-based adhesives; safe to use indoors or out; no odor complaints
• Strong and versatile Permanently bonds together almost anything interior or exterior
• High solids Provides excellent coverage
• Nonshrinking Does not crack or lose bond
• High strength Stronger than many substrates it joins together; up to 3 times the strength of conventional adhesives
• Fast curing Provides permanent overnight bond
• Long open time Offers flexibility in repositioning; user friendly
• Nonfreezing Can be applied to frozen, frost-free lumber
• Broad service temperature range Suitable for use in hot and cold environments
• Installation of carpet tack strip Allows power stretching of carpet in 2 hours
• Nonflammable Improves worker safety
• Contributes to LEED credit, Suitable for use in all 50 states South Coast Bay Area compliant
• AFG-01 approved Meets industry standards

29 oz. - $11.15
10 oz. - $5.59

A very clear, fast setting, room temperature curing, two-part adhesive for bonding a variety of materials, such as many metals, ceramics, wood and many plastics. This product is also used by wood flooring installers to clear fill knots allowing the natural beauty to show through while adding durability and quality finishes.

$10.99

This applicator is a low-cost portable, self contained metering, mixing and dispensing machine that simultaneously meters and mixes two-part adhesives as the material is applied.

$45.92

3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742 is for the 50 ml EPX applicator. The applicator is used to dispense 3M™ Scotch-Weld™ adhesives in duo-pak cartridges.

$1.25

Liquid Nails Subfloor and Construction adhesive

*VOC Complient
*Contributes to LEED certification
*Extremely strong, durable bond
*Water clean up

Recommended for: "increasing the structural integrety of walls and subfloor systems using plywood, waferboard, lumber and treated lumber, particleboard and foamboard."

Not recommened for: "bonding underlayment directly to concrete or for uses other than subfloor, deck and wall system installations."

29oz - $4.99
10oz - $2.79

Liquid Nails Subfloor and Construction adhesive solvent based

*Creates stronger subfloor systems
*Reduces squeaking
*Bridges gaps
*Easiest cold weather gunning
*Bonds wet, frozen and treated lumber

Recommended uses: "increasing the structural integrity of wall, deck and subfloors systems using the following common building materials: plywood, waferboard, particleboard, lumber and treated lumber."

Not recommended for: "bonding underlayment directing to concrete or for uses other than subfloor, deck and wall subfloor installation."

 29oz. - $4.99
10oz. - $2.79

From Titebond's website:

"Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications. 1 Gallon Refill Bottle - $29.00 16oz. Squeeze Bottle - $8.99

	Physical Properties (Typical)		TypeAdvanced Proprietary Polymer Calculated VOC: 5.6 g/L StateLiquid Weight/gallon9.22 lbs ColorTan Chalk temperature*Approx. 47°F Dried filmLight brown Flashpoint>200°F. Solids52% Freeze/thaw stabilityStable Viscosity4,200 cps pH2.5 Storage life12 months in tightly closed containers below 75°F. *Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
	Application Guidelines		Application temperatureAbove 47°F. Open assembly time10 minutes (70°F./50%RH) Total assembly time20-25minutes (70°F./50%RH) Minimum required spreadApproximately 6 mils or 250 square feet per gallon Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) Methods of application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess. Patent Pending
	Bond Strength ASTM D-905 (On Hard Maple)		Temperature Strength psi % Wood Failure Room Temperature 4000 57
	Product Features		Passes ANSI/HPVA Type I water-resistance Waterproof formula that cleans up with water Superior strength - Strong initial tack Designed for interior and exterior applications Longer open assembly time Lower application temperature Unaffected by finishes FDA approved for indirect food contact
	Limitations		Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
	Caution Statement		No caution information is needed. Please refer to the Material Safety Data Sheet for further information.

From Titebond's website:

Titebond Polyurethane Glue is a breakthrough in adhesive technology. It is the only polyurethane glue to combine a long 20 minute working time with a short 45 minute clamp time. It is a versatile, professional-strength glue specifically formulated for multi-purpose applications. In addition to its superior wood-to-wood performance, Titebond Polyurethane Glue is ideal for metals, ceramics, most plastics, HPL, Corain¤, stone and other porous/non-porous materials. It is ready-to-use, offers excellent sandability and is unaffected by finishes.

8oz. - $5.99

	Physical Properties (Typical)		Type Polyurethane Calculated VOC: 0 g/L State Liquid Weight/gallon 9.55 lbs. Color Brown Flashpoint >200°F. Dried film Yellow Freeze/thaw stability Stable Solids 100% Viscosity 8,500 cps Storage life 12 months in tightly closed containers at 75°F.
	Application Guidelines		Application temperature Above 50°F. Assembly time after glue application 20-25 minutes (70°F./50%RH) Minimum required spread Approximately 6 mils or 250 square feet per gallon Required clamping pressureEnough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods). Methods of application Easily spread with a roller, spreader or brush. Cleanup Mineral spirits while glue is wet. Scrape or sand off dried excess.
	Bond Strength ASTM D-905 (On Hard Maple)		Temperature Strength psi % Wood Failure Room Temperature 3,500+ 60 150°F. Overnight 3,000+ 50
	Product Features		100% waterproof (Passes ANSI Type I & II water-resistance testing) Bonds virtually everything Epoxy-like strength - No mixing Short clamp & fast cure Excellent sandability 100% solids Solvent free
	Limitations		Titebond Polyurethane Glue is not for structural applications below the waterline. For ease of application, the glue, temperature and materials to be bonded should be above 50°F. Lower temperatures will cause the glue to thicken.
	Caution Statement		WARNING: EYE AND SKIN IRRITANT. POTENTIAL SKIN AND RESPIRATORY SENSITIZER. Contains isocyanate containing polymers. Contact causes eye irritation. Prolonged or repeated skin exposure may cause irritation and sensitization or allergic reaction. Contact may stain skin. Do not allow eye contact. Avoid prolonged or repeated contact with skin. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and seek medical attention. For skin, wash thoroughly with soap and water. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.